Can You Sharpen a Cricut Blade? (Is It Even Possible?)

This post may contain (Amazon) affiliate links, and we may earn a small commission from qualifying purchases. Thank you for your support!

If you’re a Cricut user, you know that keeping your blades sharp is essential for optimal performance. In this article, we’ll discuss how to sharpen your Cricut blade (and whether or not it’s even possible). We’ll also share some tips on how to extend the life of your blades.

How can you sharpen a Cricut blade? Read on to find out more!

Can you sharpen a Cricut blade?

The answer to this question is no. You cannot sharpen a Cricut blade yourself. Cricut blades are made of carbide steel, which is a very hard metal that is designed to be replaced when they become dull. This means that the blades can stay sharp for a long time – however, they will eventually become dull with extended use. When this happens, you’ll need to replace the blade entirely.

That being said, there are ways to extend the life of your Cricut blades. Here are a few tips:

  • Don’t force the blade: if you’re having trouble cutting through material, try switching to a different blade rather than forcing the issue. Forcing the blade can cause it to break or become damaged.
  • Store blades properly: when you’re not using your Cricut, make sure to store the blades in a safe place. This will help to protect them from damage and extend their lifespan.
  • Keep separate blades for different materials: if you’re cutting a lot of different materials, it’s a good idea to have separate blades for each type. This will help to prevent the blades from becoming dull too quickly. Thicker cardstock, for example, will dull a blade more quickly than vinyl.

Cleaning your Cricut blades

While you can’t sharpen your blade, it is possible to clean it. Over time, the blade can become clogged with debris, which can dull the blade and cause it to tear the material.

Does aluminum foil sharpen Cricut blades?

Aluminum foil does not sharpen the blades. It only cleans all the junk off your blade. To clean your blade, simply remove it from the machine and push it into a ball of aluminum foil several times. This will help to remove any debris that’s clogging the blade.

How long does a Cricut blade last?

As mentioned above, you’ll eventually need to replace your Cricut blade when it becomes dull. However, how often you need to do this will depend on how often you use your machine. If you’re using your Cricut frequently, you may need to replace the blade every few months. However, if you only use it occasionally, you may be able to get away with replacing the blade once every two years or so.

You’ll know it’s time to replace the blade when you start seeing tears in your material or if the cuts are becoming less precise. If you’re unsure, it’s always better to err on the side of caution and replace the blade sooner rather than later.


No matter how often you use your Cricut, it’s important to keep an eye on the blade and replace it when necessary. By following these tips, you can ensure that your machine is always performing at its best!

Do you have any tips for extending the life of Cricut blades? Share them with us in the comments!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *